Card Sleeves

Card Sleeve Buyer’s Guide: Tyvek® & RFID Credit Card Sleeves

2 1/4 x 3 1/2 • Tyvek® or RFID Shielding • Printed on Both Sides

A card sleeve protects a credit card, gift card, hotel key, or ID from scratches, moisture, and wear, and gives you a branded place to put your logo and instructions. We stock two sleeves, both 2 1/4 x 3 1/2 inches and sold 500 per carton: a lightweight Tyvek® sleeve and an RFID-shielding sleeve for contactless cards.

Both sleeves can be custom printed on both sides. This guide compares the two, explains fit and RFID protection, lists every common use, from banks and hotels to casinos and campuses, and covers printing and ordering.

Ready to order? Start here.

Tyvek® vs RFID: Which Sleeve Do You Need?

Sleeve Material Protects Against Best For Shop
Tyvek® 14# Tyvek® Scratches, wear, moisture, tearing Gift cards, hotel keys, loyalty and ID cards Shop Tyvek®
RFID shielding 32# tear-resistant shielding stock Scratches and wear, plus RFID scanning Contactless credit, debit, ID, and access cards Shop RFID

Tyvek® card sleeve

Light, tough, and the lower-cost choice.

  • 14# Tyvek®: tear- and water-resistant
  • Thumb notch for easy card removal
  • Slim enough for wallets and lanyards
  • Recyclable as #2 HDPE where accepted
  • Does not block RFID signals

RFID-shielding sleeve

Physical protection plus RFID shielding.

  • 32# tear-resistant shielding material
  • Helps block scans of contactless cards inside
  • For tap-to-pay cards, passport cards, and badges
  • Same 2 1/4 x 3 1/2 size
  • Printable for branded card programs
Quick rule: If the card has a contactless (tap) chip and you want it shielded, choose RFID. For everything else, the Tyvek® sleeve protects the card for less. Tyvek® is water-resistant, not waterproof, so don’t count on either sleeve to protect a card that’s been submerged.

Size & Fit: Made for Standard Wallet Cards

Credit cards, gift cards, hotel keys, and most IDs are the standard CR80 size: about 2 1/8 x 3 3/8 inches. Our 2 1/4 x 3 1/2 sleeve gives about 1/8 inch of clearance, so the card slides in easily without rattling around.

Fits

Standard wallet-size cards.

  • Credit, debit, and prepaid cards
  • Gift, loyalty, and membership cards
  • Hotel keycards and access badges
  • Driver’s licenses and passport cards
  • Business cards (2 x 3 1/2)

Check first

Cards with extras.

  • Cards thicker than standard
  • Raised lettering or attached key tags
  • Cards with a punched slot or clip
  • Test one before ordering in bulk

Too big

Use an envelope instead.

  • Trading cards (2 1/2 x 3 1/2)
  • Larger ID and badge formats
  • Booklets, passports, and folded inserts
  • Ask about custom sizes
Mailing a card? Sleeves slide into card carriers and statements that mail in a #10. For mailing the whole package, see the financial and banking guide or browse Tyvek and kraft envelopes by size.

Uses: Who Uses Card Sleeves

Banks and credit unions

New, replacement, and reissued cards.

  • Credit, debit, ATM, and prepaid cards
  • RFID for contactless cards
  • Instructions or activation steps on the back

Gift cards

Retail, restaurant, and holiday programs.

  • Branded presentation at checkout
  • Card amount or occasion on the sleeve
  • Corporate and incentive gifts

Hotel keycards

Hotels, resorts, cruise lines, and rentals.

  • Room number and check-out time
  • Wi-Fi, amenities, and dining info
  • A clean, branded welcome

Loyalty and membership

Gyms, clubs, and warehouse stores.

  • Member number and renewal date
  • Rewards rules or app download
  • Keeps the card looking new

Employee ID and access badges

Offices, plants, and hospitals.

  • RFID for proximity and smart badges
  • Building rules or emergency numbers
  • Issued at onboarding

Schools and campuses

Student IDs, dorm keys, and meal plans.

  • Campus map or support numbers
  • RFID for tap-enabled campus cards
  • Handed out at orientation

Government IDs

Licenses, passport cards, and agency IDs.

  • RFID for passport cards and enhanced licenses
  • Protects new IDs from scratches
  • Agency name and contact info

Healthcare and insurance

Member ID and patient cards.

  • Insurance ID cards in welcome kits
  • Customer service and claim numbers
  • Keeps cards readable for years

Transit and parking

Passes, fare cards, and garage access.

  • RFID for tap fare and gate cards
  • Route or account info on the back
  • Survives daily use

Casinos and player’s clubs

Player’s cards and hotel keys.

  • Club tier and offers on the sleeve
  • Matching sleeves for room keys
  • Event and tournament promotions

Events and conferences

Credentials, VIP passes, and season tickets.

  • Schedule, seating, or Wi-Fi on the back
  • Sponsor logos
  • RFID for tap-entry credentials

Direct mail and promotions

Reward, rebate, and sample cards.

  • Protects cards inside mailers
  • Brand message on both sides
  • Fits card carriers in a #10
Also used for: Library cards, fuel and fleet cards, prepaid phone cards, rental car keycards, appointment and business cards, and small flat items such as SIM and memory cards.
Hotel and hospitality programs: Guide: Hospitality Envelopes
↑ Back to top

RFID Protection: What It Does and Doesn’t Do

What RFID shielding does

Helps block radio signals to the card inside.

  • Helps prevent unwanted scans (“skimming”) of contactless cards
  • Works only when the card is fully inside
  • Take the card out to tap and pay

Cards that use RFID

Look for the contactless symbol.

  • Tap-to-pay credit and debit cards
  • U.S. passport cards and enhanced licenses
  • Proximity badges, campus, and transit cards

What it won’t do

Shielding isn’t the same as physical protection.

  • Magnetic stripes and chip contacts don’t use RFID
  • A thick or tough sleeve alone doesn’t shield
  • The Tyvek® sleeve does not block RFID
Test it with your card: Put a card in the sleeve and hold it to a reader. If the reader can’t read it, the sleeve is shielding it. Readers vary, so test with the cards and readers your customers use.

Custom Printing: Brand Both Sides

Both sleeves can be custom printed on both sides: your brand on the front and instructions on the back.

Front

Make it look like part of the card.

  • Logo and brand colors
  • Card name: gift card, room key, member card
  • Gift amount or occasion
  • A short tagline or offer

Back

Put the useful information here.

  • Activation steps or PIN reminders
  • Room number, Wi-Fi, check-out time
  • Terms, balance check, or support number
  • Website, app, or QR code

Print options

Line copy or solid coverage.

  • Line copy: text and simple artwork, 1 or 2 colors
  • Solid: bold areas of color, 1 to 4 colors
  • Plan artwork in our free layout tool
Have us print it: Tyvek® can melt in laser printers and copiers, so it’s best printed professionally. We print millions of Tyvek Envelopes and we print them well! Send your artwork with your order, or call 612.867.2121 for help.

Checklist: Before You Order

1. Identify the card

Standard CR80 size? Any raised parts or tags?

2. Contactless?

Tap-enabled cards may need RFID shielding.

3. Pick the sleeve

Tyvek® for protection, RFID for shielding too.

4. Count the cards

Sold 500 per carton; plan for reissues.

5. Decide on printing

Plain, or printed on one or both sides.

6. Line copy or solid

Simple text, or bold color coverage.

7. Write the back

Instructions, numbers, and terms.

8. Test a sample

Fit, removal, and any RFID reader test.

9. Plan the timing

Printed orders take longer than plain stock.

Need samples? Call 612.867.2121 or email us for samples or a quote on large or printed orders.

FAQ: Card Sleeves

Quick answers on sizes, RFID, uses, and printing.

What is a card sleeve?
A thin, open-end holder for a wallet-size card. It protects the card from scratches and wear, and a printed sleeve adds branding and instructions.
What size are your card sleeves?
Both are 2 1/4 x 3 1/2 inches, sized for standard 2 1/8 x 3 3/8 cards. Shop card sleeves.
What is the difference between Tyvek® and RFID sleeves?
The Tyvek® sleeve (14#) protects against scratches, tearing, and moisture. The RFID sleeve (32#) adds shielding that helps block scans of contactless cards.
Do Tyvek® card sleeves block RFID?
No. Choose the RFID-shielding sleeve if the card needs to be shielded.
Do I need an RFID sleeve for my credit card?
Only if it’s a contactless (tap) card and you want it shielded when it’s not in use. Chip and magnetic stripe cards don’t use RFID.
Can card sleeves be printed on both sides?
Yes. Both sleeves can be printed on both sides, in line copy (1 or 2 colors) or solid coverage (1 to 4 colors). Learn about custom printing.
What are card sleeves used for?
Credit and debit cards, gift cards, hotel keys, loyalty and membership cards, employee badges, student IDs, government IDs, insurance cards, transit passes, casino player’s cards, and event credentials.
Are card sleeves good for hotel keycards?
Yes. A printed sleeve gives guests the room number, Wi-Fi, and check-out time with the key. See the hospitality guide.
Will a business card fit in a card sleeve?
Yes. A standard 2 x 3 1/2 business card fits. Trading cards (2 1/2 x 3 1/2) are too wide.
Are card sleeves waterproof?
No. Tyvek® is water-resistant and tear-resistant, but a sleeve isn’t sealed, so it won’t protect a card that’s submerged.
How many sleeves come in a carton?
Both sleeves are sold 500 per carton, with lower per-carton prices on larger orders.
Can I print on Tyvek® sleeves myself?
We don’t recommend it. Tyvek® can melt in laser printers and copiers. We print millions of Tyvek Envelopes and we print them well!

Ready to Order Your Envelopes?

Shop by size, or talk with an envelope specialist who will match the right size, material, and closure to your mailing.

Doug Nelson

About Doug Nelson

Linkedin Profile

Over 40 years of hands-on expertise in the envelope and printing industry. At Easy Envelopes, I partner with businesses to deliver everything from high-volume stock orders to custom-manufactured specialty solutions, including durable Tyvek envelopes. My core focus is taking the guesswork out of mailing logistics. I work closely with the US Postal Service to guarantee that every business reply mail envelope we print meets strict USPS specifications, protecting my clients from costly compliance errors and ensuring they qualify for the absolute lowest postage rates.

© 2026 Easy Envelopes. Buyers Guide Knowledge Base.